AquaPoxy epoxy grout is a three part general purpose water clean-up epoxy system for grouting most types of ceramic tiles in demanding environments. It consists of epoxy resin, epoxy hardener and selected colored fillers. It is available in 10 colours.

WHERE TO USE: AquaPoxy grout can be used for internal & external wall & floor tile grouting of ceramic, vitrified tiles, marble & stone.

HOW TO USE:
(A) SURFACE PREPARATION: Before application of AquaPoxy, ensure the tile adhesive has set firmly. Remove any loose or foreign material from the grout joints and ensure the grout joints are clean & dry.
(B) MIXING: AquaPoxy is a three component system for onsite mixing. Initially add the epoxy resin to the epoxy hardener to a clean container and mix thoroughly. To this mix, while stirring, gradually add the powder colour grout and mix this until lump free and uniform colour is achieved.
(C) APPLICATION: Using a rubber squeegee, press the grout firmly into the joints, ensuring that the joints are completely filled. Remove excess grout from the surface of the tiles with the rubber squeegee using a diagonal motion. Clean off the surplus grout from the joints and surface within 10-15 minutes. Use a damp sponge in a circular motion and keep it relative to the surface to achieve a flush joint. Do not allow water to flow or run into ungrouped joints.