Product
NSA FLEX 40 is a highly polymer modified, flexible, cementitious, high performance adhesive for fixing different types of tiles and natural stone on wall and floor where slight movement & vibration is expected. Also suitable for fixing tiles and/or stone on outer walls at high rise building or any type cladding.
WHERE TO USE : It can be used for interior & exterior application of granite, marble, ceramic, vitrified tiles and natural stone. It is suitable for plaster, cement screeds, plaster boards and pre-cast concrete surfaces.
HOW TO USE:
(A) SURFACE PREPARATION: Surface must be free
of dust, oil and grease, dry and free from moisture. If
any such contaminants are found, clean thoroughly by
dry brushing or any other suitable method. Ensure that
the surface is flat, stable, well cured, adhered and has
no absorption. Correct and repair undulation/damage
on the surface at least 72 hours before the application
of NSA FLEX 40.
(B) MIXING: Mix 3 parts of NSA FLEX 40 to 1 part of
water gradually by using suitable stirrer to achieve a
smooth and workable paste. After mixing, allow the
paste to stand for 5 minutes to get the chemical
activated.
(C) APPLICATION: Apply thin/thick layer of NSA FLEX
40 over the surface with the smooth edge of a trowel
and comb the applied adhesive to achieve the desired
thickness. Press the tiles onto NSA FLEX 40 to ensure
good adhesion properties.
- It is flexible adhesive for application on different types of surface.
- It is ready to use, single component.
- Crack resistant & waterproof.
- Suitable for different kind of tiles, granite, marble and stone in large formats application.
- Non slip.
- Excellent adhesion properties.
- Self curing product.
- No shrinkage.
- Internal and external use.
Product
