Product
Bond-A-Block (B-A-B) is a versatile, thin jointing material for laying AAC blocks, fly ash bricks, concrete blocks etc. It is specially designed to provide stronger, much more durable bonding between the blocks and superior adhesive strength. It replaces conventional cement and sand mix mortar.B-A-B is now ready for application.
WHERE TO USE:
Bond-A-Block can be use an jointing mortar between
the AAC & cement blocks.B-A-B is now ready for application.
HOW TO USE:
(A) SURFACE PREPARATION: Application area
should be clean, with no loose particles or dust for
better bonding. Efflorescence & any other contaminant
which could impair the natural bond should be
removed. The surface of block should be slightly wet
prior to application of jointing Mortar.
(B) MIXING: Depending on the thickness of the
product to be applied, add approximately 25-30% of clean potable water powder to get a smooth, uniform,
workable mix. Allow ample of time for initial mixing. B-A-B is now ready for application.
- Pre-mixed and ready to use. Just add water at site.
- No water curing is required after application.
- Easy to mix. Much faster to apply due to its superior flow-ability and water retention properties.
- Thinner jointing material with very high adhesive strength improves overall masonry strength and bearing capacity.
- Raking of joints is not required before plastering.
- Ready for plastering just after 24 hours.
- Eliminates lengthy process of site mixing, transport and storage of all individual materials.
- Raw materials are processed, reducing the chances of efflorescence.
- (B-A-B) jointing agent is made from Eco- friendly materials.
Product
